 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|||||||||
|
 |
PGDQ2.MH14014 Marking and Labeling Systems - Component MIRMYR (File MH14014) MIRMYR II (File MH14014)
"MIRMYR II" Affixed to aluminum, galvanized steel and alkyd enamel, maximum temperature 150C (302F), minimum temperature -40 C (-40 F); epoxy paint, maximum temperature 150 C (302 F); polyester paint, nylon plastic, melamine plastic, polycarbonate, phenolic, porcelain and stainless steel, maximum temperature 100 C (212 F), minimum temperature -29 C (-20 F); acrylic paint and acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (176 F); polystyrene, maximum temperature 80 C (176 F), minimum temperature -29 C (-20 F); unsaturated (thermoset) polyester plastic, maximum temperature 60 C (140 F), minimum temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water or lubricating oils. "MIRMYR II" is suitable for additional printing with certain ribbon inks. Suitable for sub-surface printing. MIRMYR IV (File MH14014)
"MIRMYR IV" Affixed to aluminum, galvanized steel, stainless steel and alkyd enamel, maximum temperature 125 C (257 F), minimum temperature -29 C (-20 F), acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 100 C (212 F), minimum temperature -29 C (-20 F); nylon, maximum temperature 80 C (176 F), minimum temperature -29 C (-20 F); polypropylene, maximum temperature 80 C (176 F); polystyrene, maximum temperature 60 C (140 F), minimum temperature -29 C (-20 F). Suitable where exposed indoors to high humidity or occasional exposure to water. MIRMYR V (File MH14014)
"MIRMYR V"Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel, polyester paint, porcelain, acrylic paint, polyester powder paint, polyurethane powder paint, polyester/polyurethane powder paint blend, epoxy/urethane powder paint blend, epoxy paint, epoxy powder paint and epoxy/polyester powder paint blend, phenolic, polycarbonate, unsaturated (thermoset) polyester, melamine plastic and nylon, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); acrylonitrile butadiene styrene (ABS) plastic and polystyrene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (176 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable where exposed outdoors when affixed to the surfaces mentioned above except polypropylene and phenolic. MIRVY (File MH14014)
"MIRVY" Affixed to galvanized steel, porcelain, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); aluminum, stainless steel, alkyd enamel, acrylic paint, unsaturated (thermoset) polyester plastic, maximum temperature 80 C (176 F), minimum temperature -29 C (-20 F); epoxy painted metal, maximum temperature 80 C (176 F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60 C (140 F), minimum temperature -29 C (-20 F); polyphenylene oxide (PPOX) and polystyrene, maximum temperature 60 C (140 F); polypropylene, maximum temperature 40 C (104 F), minimum temperature -29 C (-20 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for lubricating oils when affixed to the above surfaces except epoxy painted metal, polyphenylene oxide and polystyrene. MIRVY II (File MH14014)
"MIRVY II" Affixed to galvanized steel, porcelain, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); aluminum, stainless steel, alkyd enamel, acrylic paint, unsaturated (thermoset) polyester MIRVY IV (File MH14014)
Affixed to acrylic paint, alkyd enamel, aluminum, stainless steel, epoxy paint, galvanized steel, polyester paint and polyester powder paint, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); MIRVY V (File MH14014)
Affixed to alkyd enamel, acrylic paint stainless steel and nylon, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); aluminum and epoxy powder paint, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); unsaturated thermoset polyester and southern yellow pine, maximum temperature 80 C (176 F); galvanized steel and polyester paint, maximum temperature 60 C (140 F), minimum temperature -40 C (-40 F); acrylonitrile butadiene styrene (ABS) plastic, polyethylene, polyphenylene oxide, polypropylene and polystyrene, maximum temperature 40 C (104 F), minimum temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for occasional exposure to lubricating oils on all surfaces except unsaturated thermoset polyester and southern yellow pine. Also suitable for outdoor use on all surfaces except unsaturated thermoset polyester, southern yellow pine and epoxy powder paint. Also suitable for occasional exposure to gasoline splashing when affixed to alkyd enamel, acrylic paint, aluminum and galvanized steel. Also suitable for use on aluminum, fiberglass and southern yellow pine surfaces of portable ladders. MIRVY VI (File MH14014)
Affixed to metals, maximum temperature 100 C (212 F), Plastic Group I, maximum temperature 100 C (212 F), Plastic Groups II, III, IV, V, VI, VII and VIII, maximum temperature 80 C (176 F), Electrostatic coated metal A and C, maximum temperature 80 C (176 F). Suitable where exposed indoors and outdoors. A is polyester powder paint C is epoxy powder paint. Affixed to aluminum, stainless steel, alkyd enamel, acrylic paint, galvanized steel, porcelain, polyester paint, nylon and polycarbonate, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); epoxy powder paint, epoxy paint, polyester powder paint, polyester/epoxy powder paint blend, unsaturated (thermoset) polyester, polypropylene and acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); southern yellow pine, maximum temperature 80 C (176 F); polyethylene and polystyrene , maximum temperature 40 C (104 F), minimum temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for outdoor use when affixed to the surfaces mentioned above except polypropylene and southern yellow pine. Also suitable for occasional exposure to lubricating oil when affixed to alkyd enamel and polypropylene . Also suitable for use on aluminum, fiberglass and southern yellow pine surfaces of portable ladders. SUM-1 (File MH14014)
"SUM-1". Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel, polyester paint, porcelain, acrylic paint, polyester powder paint, epoxy/urethane powder paint blend, epoxy paint, textured alkyd enamel/melamine paint blend, textured alkyd enamel powder coat paint, maximum temperature 150 C (302 F), minimum temperature -40 C (-40 F); unsaturated (thermoset) polyester, nylon, melamine plastic and phenolic, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); polycarbonate, acrylonitrile butadiene styrene (ABS) plastic, polystyrene and textured polypropylene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (176 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for lubricating oils when affixed to aluminum, alkyd enamel, polyester paint, acrylic paint, nylon, ABS plastic and polystyrene. SUM-2 (File MH14014)
"SUM-2". Affixed to anodized aluminum, aluminum, galvanized steel, stainless steel, polyester paint, maximum temperature 150 C (302 F), minimum temperature -40 C (-40 F); alkyd enamel, maximum temperature 125 C (257 F), minimum temperature -40 C (-40 F); phenolic, maximum temperature 100 C (212 F), minimum temperature -40 C (-40F); nylon, melamine plastic, polystyrene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (176 F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60 C (140 F), minimum temperature -40 C (-40 F); polyethylene, maximum temperature 60 C (140 F). Suitable where exposed indoors to high humidity of occasional exposure to water. Also suitable for lubricating oils when affixed to the above surfaces. PGJI2.MH25872 Printing Materials - Component THERMAN 2 (File MH25872)
"Therman 2" printed labels for producing finished printed labels with printer/ink combinations 1 and 2. Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel, acrylic paint, porcelain, polyester paint, acrylonitrile butadiene styrene (ABS) plastic, unsaturated thermoset polyester plastic, polypropylene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water or lubricating oils. Suitable for sub-surface printing. THERMAN III (File MH25872)
"Therman III" printed labels for producing finished printed labels with printer/ink combinations 1 and 2. Affixed to aluminum, stainless steel, galvanized steel, alkyd enamel, acrylic paint, porcelain, polyester paint, acrylonitrile butadiene styrene (ABS) plastic, unsaturated thermoset polyester and polypropylene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Suitable for sub-surface printing. THERMAN IV (File MH25872)
"Therman IV" printed labels for producing finished printed labels with printer/ink combinations 1 and 2. Affixed to aluminum, stainless steel, galvanized steel, alkyd enamel, acrylic paint, porcelain, polyester paint, acrylonitrile butadiene styrene (ABS) plastic, unsaturated thermoset polyester and polypropylene, maximum temperature 60 C (140 F), minimum temperature -40 C (40 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Suitable for sub-surface printing. THERMAN V (File MH25872)
"Therman V" printed labels for producing finished printed labels with printer/ink combinations 1 and 2. Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel, acrylic paint, polyester paint, acrylonitrile butadiene styrene (ABS) plastic, polyethylene, polypropylene, polyphenylene oxide, polystyrene and phenolic plastic, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F), unsaturated thermoset polyester, textured aluminum and southern yellow pine, maximum temperature 80 C (176 F); epoxy paint, maximum temperature 60 C (140 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for exposure to lubricating oils when affixed to all surfaces except epoxy painted metal, unsaturated thermoset polyester, textured aluminum and southern yellow pine. Also suitable for use on aluminum, fiberglass and southern yellow pine surfaces of portable ladders. Suitable for sub-surface printing. THERMAN VI (File MH25872)
"Therman VI" printed labels for producing finished printed labels with printer/ink combinations 2 and 3. Affixed to aluminum, galvanized steel, stainless steel, alkyd enamel, polyester paint, porcelain, acrylic paint, polyester powder paint, epoxy/urethane powder paint blend, epoxy paint, textured alkyd enamel/melamine paint blend and textured alkyd enamel powder coat paint, maximum temperature 150 C (392 F), minimum temperature -40 C (-40 F); unsaturated (thermoset) polyester, nylon, melamine plastic and phenolic, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); polycarbonate, acrylonitrile butadiene styrene (ABS) plastic, polystyrene and textured polypropylene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (-176 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for lubricating oils when affixed to aluminum, alkyd enamel, polyester paint, acrylic paint, nylon, ABS plastic and polystyrene. Suitable for sub-surface printing. THERMAN VII (File MH25872)
"Therman VII" printed labels for producing finished printed labels with printer/ink combinations 2 and 3. Affixed to anodized aluminum, aluminum, galvanized steel, stainless steel, polyester paint and textured alkyd powder coat paint, maximum temperature 150 C (302 F), minimum temperature -40 C (-40 F); alkyd enamel, maximum temperature 125 C (257 F), minimum temperature -40 C (-40 F); phenolic, maximum temperature 100 C (212 F), minimum temperature -40 C (-40 F); nylon, melamine plastic, polystyrene, maximum temperature 80 C (176 F), minimum temperature -40 C (-40 F); polypropylene, maximum temperature 80 C (176 F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60 C (140 F), minimum temperature -40 C (-40 F); polyethylene, maximum temperature 60 C (140 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable for lubricating oils when affixed to all of the above surfaces except for textured alkyd powder coat paint. Suitable for sub-surface printing. PGIS2.MH29269 Marking and Labeling Systems, Limited Use - Component MR-Cord (File MH29269)
"MR-Cord". Use limited to Listed Cord Sets. Suitable for indoor use when affixed to S, SE, SJ, ST, SV, SJE, SJT, SVE, SVT minimum 18 AWG. Suitable for outdoor use when affixed to SEW-A, SJEW-A, SJTW-A, SJW-A, STW-A, SW-A, minimum 18 AWG. UL Recognized wire wrap. |
|
|
 |
|